An Easy Solution to Whirlpool Cabrio F82 Error Code
If you own a Whirlpool Cabrio appliance and you’ve encountered an F82 error code, fear not. This issue can easily be fixed.
F82 is an indication of a faulty temperature sensor inside the appliance that is unable to measure and report the temperature accurately. The best solution in this situation is to simply replace the sensor, which can be done easily.
The first step is to turn off the power to the appliance and disconnect the unit from the electrical outlet. Once the power is off, you’ll need to locate the temperature sensor, which is located behind the lower kick panel or front panel, depending on the model. The panel needs to be removed in order to access the sensor.
Once the panel is removed and the temperature sensor is visible, end of the connector and locate the sensor. The sensor is a small black tube that’s located in the center of the appliance. Remove any excess screws and then carefully unplug the sensor before removing it.
Next, install the new temperature sensor in the same location. Be sure to plug the sensor in securely and then reinstall the kick panel or access panel.
Finally, turn the power back on and test the appliance by running a cycle to see if the F82 error code is no longer present.
If you have followed the steps above and the F82 error code is still present, it’s time to call in a professional appliance repair technician for assistance. A technician can diagnose the issue quickly and make any necessary repairs to get your appliance back in working order.
If you’re looking for an experienced appliance repair technician, be sure to check out our Directory of Appliance Repair Technicians. Here, you’ll be able to connect with skilled professionals who can help you with any issue you may face with your Whirlpool Cabrio appliance.
Common Solutions to Whirlpool Cabrio F82 Error Code
-
What is a Whirlpool Cabrio F82 Error Code? The Whirlpool Cabrio F82 Error Code is a fault code indicating that the washer has detected an oversized load.
-
What can cause an oversized load? An oversized load can occur for a variety of reasons, including using too much laundry detergent, having a load too large for the size of the washer, or forgetting to redistribute clothes during a cycle change.
-
What happens when the washer detects an oversized load? When the washer reaches a certain spin speed, the tachometer detects an oversized load and the Whirlpool Cabrio F82 Error Code will flash on the display. The washer will then stop the cycle and will not resume until the oversized load is removed.
-
How do I fix a Whirlpool Cabrio F82 Error Code?
To fix a Whirlpool Cabrio F82 Error Code, you should first redistribute any clothes in the washer. Once the load is balanced, the cycle can be restarted. If the F82 Code persists, you should try using less detergent. If this does not fix the problem, you should consult the owner’s manual for further instructions or contact an authorized Whirlpool service center for professional help.
- Are there any other error codes for the Whirlpool Cabrio washer? Yes. The Whirlpool Cabrio washer has other error codes, including F71, F90, and F91. For a full list of Whirlpool Cabrio Error Codes, you should consult the owner’s manual or contact an authorized Whirlpool service center.
Key Takeaways for Whirlpool Cabrio F82 Error Code
- F82 is an indication of a faulty temperature sensor in the appliance that is unable to measure and report temperature accurately.
- To fix this issue, turn off the appliance, locate the temperature sensor, uninstall the sensor, and install a new one.
- The temperature sensor is usually located behind the lower kick panel or front panel, depending on the model.
- After replacing the temperature sensor, test the appliance by running a cycle to see if the F82 error code is no longer present.
- If the F82 error code is still present, contact an appliance repair technician for assistance.