Troubleshoot an F36 Error on a Bosch Dishwasher

Dealing with a Bosch dishwasher’s F36 error code can be irritating and even a little overwhelming. But it’s important to stay calm as there could be a simple solution that’s easy to fix.

If you notice that your dishwasher is displaying the F36 error code, the first thing you’d want to do is to unplug your dishwasher and wait a few minutes before you turn it back on. This is the easiest way to see if the F36 error was simply a temporary glitch. If this doesn’t help, the next step would be to check any hoses that may have become blocked or clogged by debris.

If this still doesn’t solve the problem, then you need to look into a new heater relay. The relay will switch the heating element on at the right times during the cycle and if it isn’t working properly it can cause the F36 error. Testing the relay will tell you if it’s to blame or not.

Finally, if none of the above steps solve the error, contact one of our Directory of Appliance Repair Technicians to come and take a look at your Bosch dishwasher. The technician should be able to identify the source of your issue and provide you with a solution.

Dealing with a Bosch dishwasher’s F36 error code may require a bit of troubleshooting, but it’s important to remember that the code usually won’t indicate a major mechanical problem. To get to the bottom of what’s causing your F36 error, consider following the steps above. If this doesn’t resolve the issue, searching for an experienced appliance repair technician can also save you time and stress.

##Troubleshooting the F36 Error Code on a Bosch Dishwasher

  1. What is the F36 error code on a Bosch Dishwasher? The F36 error code indicates a shorted temperature sensing circuit on a Bosch Dishwasher.

  2. What should I do to fix the error code F36 on my Bosch Dishwasher? To fix the F36 error code, first try unplugging your dishwasher and plugging it back in after a few minutes. If the F36 code persists, check your dishwasher’s water inlet filter, drain hose, and water connection for any blockages or obstructions. If you find any, clear them, and then reset and restart your Bosch dishwasher.

  3. What else could be causing the F36 error code in my Bosch dishwasher? The F36 error code can also be caused by issues with the heating element or electronic control board. If your dishwasher is still exhibiting the F36 error code, you will likely have to have a professional dishwasher technician come and assess the dishwasher.

  4. Are there other actions I should take if I see the F36 error code? Yes, if the F36 error code persists, it’s important to unplug the dishwasher and shut off the water supply to prevent any further damage.

  5. When should I call a professional dishwasher technician to come and service my Bosch dishwasher? It may be necessary to call a professional dishwasher technician if the F36 error code continues to persist after attempting to unplug the dishwasher and clearing any blockages, or if the F36 code is accompanied by other error codes.

Key Takeaways on Troubleshooting the F36 Error on a Bosch Dishwasher

  1. Disconnect the power supply from the Bosch dishwasher by unplugging it from its power source.
  2. Check for any clogged or blocked hoses connected to the Bosch dishwasher.
  3. Consider replacing or testing the heater relay if the issue persists.
  4. Contact a qualified appliance repair technician to further investigate the cause of the F36 error code.
  5. Most F36 errors are not indicative of a major mechanical issue.