Diagnosing F33 Error Code on a Whirlpool Washer
Troubleshooting appliance problems can be a tricky business, and a dreaded error code is often the worst part. If your Whirlpool washer is displaying an F33 error code, the cause and how to resolve the problem may not be immediately obvious. Read on to learn more about this error and how to approach resolving it.
The F33 error code signals an issue with the pressure switch of your Whirlpool washer. The pressure switch monitors the water entering the washer and once the set level is reached, the switch should communicate to the washer to close the water inlet valve. If this communication does not happen, the washer will display the F33 error.
First, disconnect the power from the washer by unplugging it, or switching off the power at the breaker. Leave it off for no less than 15 minutes. Reconnect the power and try the unit again to see if the code has cleared. If it has, the issue has likely been resolved.
If the error is persistent, inspect the pressure switch for a loose hose, disconnected hose, blockage to the pressure switch or an inline fuse. Also, check that the water level is set to the correct amount. If all these are correct, the pressure switch may need to be replaced.
Troubleshooting the F33 error code on your Whirlpool washer may sound daunting, but you can figure out the root of the problem with a methodical and careful approach. If you need help or do not feel comfortable attempting the repair yourself, be sure to contact a licensed appliance repair technician.
Tackling appliance repair can be a daunting process. When your Whirlpool washer displays an F33 error code, the first step is to disconnect power from the unit and wait 15 minutes before attempting the unit again. If the error is still present, inspect the pressure switch for common issues. If the issue remains unresolved, consider enlisting the help of a professional appliance repair technician. Check our Directory of Appliance Repair Technicians for help near you.
Troubleshooting the F33 Error Code on Your Whirlpool Washer
Q: What causes the F33 Error Code?
A: The F33 Error Code indicates a temperature sensing fault on the water heating element or temperature sensing circuit.
Q: What is the first step in troubleshooting the F33 Error Code?
A: The first step in troubleshooting the F33 Error Code is to unplug the Whirlpool washer for one minute and then restart the cycle.
Q: What if the F33 Error Code persists after unplugging the washer?
A: If the error code persists, it is likely that the heating element or temperature sensing circuit has failed and will need to be inspected by a certified technician for further diagnosis.
Q: Are there any safety issues related to the F33 Error Code?
A: No, the F33 Error Code does not indicate any safety issues. However, it is recommended to have the washer serviced by a certified technician.
Q: Are there any preventative measures I can take to avoid the F33 Error Code?
A: Since the F33 Error Code is typically caused by a failed heating element or temperature sensing circuit, it is recommended to periodically inspect the washer for any signs of wear and tear on the element or circuit. Consult the owner’s manual for instructions on maintenance and troubleshooting.
Troubleshooting F33 Error Code on Whirlpool Washing Machines
- F33 error code signals an issue with the pressure switch of the washer
- First step is to disconnect power from the unit and wait 15 minutes before attempting the unit again
- Check the pressure switch for common issues such as a loose hose, disconnected hose, blockage or an inline fuse
- Ensure water level is set to the correct amount
- Consider enlisting the help of a professional appliance repair technician if issue remains unresolved