Steps to Resolve HC Error Code on Samsung Dryers
Most Samsung dryers are built to last, with vigilant maintenance and care; however, common problems such as error codes can be disruptive. The HC error code indicates that your Samsung dryer is having difficulty heating. This blog will explain how to troubleshoot an HC error code and resolve the problem.
Step 1: Check the house circuit breakers
The first step is to check if the house circuit breakers have tripped. If they have, reset the breakers, and then check if the error message has been reset.
Step 2: Check your ventilation system
If the circuit breakers are in working order, the next step is to check your dryer’s ventilation system. Over time, lint and debris can accumulate within the vents, causing the dryer to overheat and display the HC error code. It is important to regularly clean out lint from the lint trap, lint chute, fan cover, and vents located both inside and outside your home.
Step 3: Inspect the thermostat and heating element
Next, inspect the thermostat and heating element. Make sure the thermostat is functioning properly, and there is no damage to the heating element assembly. If either the thermostat or heating element is not functioning or is damaged, you will need to replace them.
Conclusion
HC error messages can be a minor inconvenience, however troubleshooting them can be confusing. Following these three steps can help you quickly and easily resolve this issue. If you feel uncomfortable attempting these repairs yourself, contact a local appliance repair technician for help. Our Directory of Appliance Repair Technicians can help you locate a technician in your area.
Troubleshooting Samsung Dryer HC Error Codes
Q: What is an HC error code?
A: An HC error code means that there is a heating circuit problem in your Samsung dryer.
Q: How can I check for the HC error code?
A: To check for the HC error code, unplug your dryer and open the console. Look for the “HC” error code or a code that starts with “HC” on the display. If you see this code, it means you need to troubleshoot the heating circuit problem.
Q: What causes an HC error code?
A: An HC error code is usually caused by a failed thermostat, heating coil, or thermal fuse.
Q: How do I check for a thermostat issue?
A: To check for a thermostat issue, remove the back panel of your dryer and look for the thermostat. Make sure the thermostat is firmly connected to the wiring harness. If it’s loose, tighten the connection and check the code again.
Q: How do I check for a heating coil issue?
A: To check for a heating coil issue, remove the front panel and look for the heating coil. Make sure the coil is securely connected to the wiring harness. If it’s not, tighten the connection and check the code again.
Q: How do I check for a thermal fuse issue?
A: To check for a thermal fuse issue, remove the back panel and look for the thermal fuse. Make sure the fuse is securely connected to the wiring harness. If it’s not, tighten the connection and check the code again.
Key Takeaways from Troubleshooting HC Error Code on Samsung Dryers
- The HC error code indicates a Samsung dryer is having difficulty heating.
- Check the house circuit breakers, they may have tripped and need to be reset.
- Regularly clean out lint and debris from the lint trap, lint chute, fan cover, and vents.
- Inspect the thermostat and heating element, and replace if either is not functioning or damaged.
- If unable to troubleshoot yourself, contact a local appliance repair technician for help.