Troubleshooting a GE Dishwasher with an H20 Error Code
If you’ve recently encountered an H20 error code on your GE dishwasher, you may be wondering what it means and how to fix it. Fortunately, there are some relatively easy steps you can take to troubleshoot the error and get your dishwasher back up and running.
One of the first things to do is to turn the dishwasher off and then unplug it and remove the lower access panel. If there is any water in the base, you’ll need to check the drainage pump underneath, located on the left side of the dishwasher cavity. Make sure the drain line from the pump to the disposal is clear and all clamps are secure.
Next, look for any debris or obstructions in the chopper blade or shredder. If the blade is clogged, turn the dishwasher off and unplug the unit. Remove and clean the chopper blade and shredder, putting any small pieces into the garbage disposal. After reassembling and putting the access panel back in, plug the dishwasher back in and turn it on.
The last step is to ensure that the dishwasher has the proper amount of water. Inspect the water supply line and make sure that it is turned all the way on, then run the wash cycle and check to see if the water level rises. If it does not, you may need to adjust the water pressure valve on the supply line.
By taking these troubleshooting steps, you should be able to fix the H20 error code on your GE dishwasher. If these techniques don’t work and you’re still experiencing the error code, you may need to call an appliance repair technician. Our directory of appliance repair technicians can help you find an experienced technician near you who is qualified to work on GE dishwashers.
Frequently Asked Questions about Troubleshooting H20 Error Code for GE Dishwasher
1. What is the H20 Error Code?
After running a cycle, if your GE dishwasher is displaying the code H20 on the display panel, this is an indication that the dishwasher has detected an issue which prevents it from taking in water.
2. What are the common causes of the H20 Error Code?
One of the most common causes of the H20 error code is clogged filters or a clogged drain line. This means that the dishwasher is unable to take in water or to drain the water properly while running a cycle. In some cases, a faulty water inlet valve or water fill hose can also be the source of the H20 error code.
3. What should I do if my dishwasher displays the H20 Error Code?
If your GE dishwasher is displaying the code H20, the first thing you should do is check for clogged filters or a clogged drain line. If the filters or drain line are clogged, the dishwasher will not be able to take in water or to drain the water properly. To clear a clog, try running the rinse cycle with a cup of vinegar placed on the top rack of the dishwasher.
4. What is the procedure for resetting the H20 Error Code?
After you have addressed the issue that resulted in the H20 error code, you will need to perform a reset. To do this, press and hold the START/RESET pad for 3 seconds. The dishwasher should then be reset and it should run normally.
5. What should I do if the H20 Error Code still displays after a reset?
If the H20 error code is still displayed after a reset, it is likely that the dishwasher is not able to take in water or to drain water. In this case, you should check the water inlet valve and water fill hose to see if they are working properly. If the issue is not resolved, it is recommended that you contact a professional to inspect and service the dishwasher.
Key Takeaways from Troubleshooting a GE Dishwasher with an H20 Error Code
- Turn the dishwasher off and unplug it, then remove the lower access panel and check for any water in the base.
- Inspect the chopper blade and shredder for debris or obstructions and clean it if necessary.
- Reassemble and put the access panel back in place before plugging the dishwasher back in and turning it on.
- Inspect the water supply line and make sure it is turned all the way on and run the wash cycle to check the water level.
- If these techniques do not work, you may need to call a qualified appliance repair technician, using our directory to find one near you.