Don’t Panic When You Get an FD Error Code on Your Midea Washer
Are you a proud owner of a Midea washer, only to find that the error code FD has been displayed on the machine? Before you panic, this error is unfortunately pretty common - and can usually be fixed very easily. Here is what you need to know about solving the FD error code on your Midea washer.
The FD error code that your Midea washer is displaying is an indication of a water level issue. The FD stands for a “Failed Draining” error, indicating that the machine is not draining the water properly. This is typically caused when the machine isn’t able to drain the water during the cycle due to a hose being blocked.
The solution here is simple: use a rubber plug to unclog the hose, if your machine has one. Or, if you are able to, disconnect the hose altogether, and clean the outside to make sure it is free from any dirt of debris that is prevented the water from draining.
Once your washer is able to successfully drain the water, the FD error code should be gone and you can continue using the machine without issue.
If you are unable to troubleshoot the FD error code on your Midea washer yourself, there is no need to panic. Our directory of appliance repair technicians have experts who can diagnose and repair the issue that is causing your machine to display the error code quickly and efficiently. Don’t forget to check out our list when you are in need of help!
Frequently Asked Questions about the Midea Washer FD Error Code
- What is the Midea Washer FD Error Code?
The Midea Washer FD Error Code indicates a problem with the water supply to the washer, and is displayed when the washer does not detect any water entering the drum.
- What can I do to fix the Midea Washer FD Error Code?
If the Midea Washer FD Error Code appears, there are a few steps you can take to attempt to resolve the issue. Check to ensure the water supply hoses are connected to both the washer and the water supply line, observe the water valves to ensure they are open and the screen filters are clean. If the error persists, you may need to consult a qualified service technician.
- What should I do if I do not have a qualified service technician available?
If you do not have access to a qualified service technician, you may want to attempt to reset the washer. First, unplug the appliance from the power supply, wait 15 seconds and then plug it in again. If the error code appears again, you may have an issue with the water supply, and you should contact Midea or a local service technician.
- What other error codes can my Midea washer display?
Aside from the FD Error Code, your Midea washer can also display a number of other error codes, such as FH, LO, UE and OE. Refer to the user manual provided with your washer for a complete list of error codes, as well as advice on how each code should be addressed.
- How can I find a qualified service technician?
The best way to find a qualified service technician is to contact your local Midea service center. Alternatively, you may be able to find an experienced independent service technician in your local area.
Key Takeaways from Solving the Midea Washer FD Error Code
- The FD error code on Midea Washers indicates a water level issue, or that the machine is not draining the water properly.
- The most likely cause for this is that a hose is blocked, which can be unclogged with a rubber plug, or by disconnecting and cleaning the outside of the hose.
- Successfully draining the water should eliminate the FD error code and allow you to use the machine without issue.
- If you are unable to troubleshoot the issue yourself, seek help from an appliance repair technician.
- Our directory of appliance repair technicians can assist you quickly and efficiently.