Diagnosing and Resolving the ‘F8’ Error Code in Your Whirlpool Washer

While it may be easy to assume the worst, an F8 error code on your Whirlpool washer usually has an easy-to-find solution. In fact, you may be able to troubleshoot and resolve the problem yourself in just a few minutes. This error code can be associated with a few different issues, but all with similar solutions.

The F8 error code indicates a system suspension, meaning the washer may not be able to finish its cycle or complete the cleaning or draining process. This means the washer will stop running and will require troubleshooting. The F8 code can be caused by a power surge, a power outage, or incorrect settings being overloaded.

It is important to unplug your washer for about 20 minutes before restarting it. This will allow the system to reset and completely reset the washer’s system. Restarting the washer will often resolve the issue, indicating an issue with a minor power surge or outage.

You may also need to adjust the settings of your washer’s cycle to help the cycle finish. Reduce the size of the load, reduce the amount of detergent used, select a different cycle setting, or reduce the temperature of the water being used. Ensure all settings including soil level, temperature, and cycles are properly adjusted.

If the error code is still present, consider checking your washer’s power cords, water hoses, and other possible obstructions. Make sure the power and water connections remain secure and free of kinks or blockages.

If you’ve completed all of these steps and are still unable to rectify the F8 error code on your Whirlpool washer, it may be time to call in a licensed technician. Our Directory of Appliance Repair Technicians can help you connect with trusted professionals in your area who can resolve the error code issue.

What Is the ‘F8’ Error Code on a Whirlpool Washer?

The ‘F8’ error code on a Whirlpool Washer indicates that the washing machine has detected a water level pressure switch error. This is usually due to a faulty water level pressure switch or poor water drainage from the washing machine.

What Are Possible Reasons for an ‘F8’ Error?

The possible reasons for an ‘F8’ Error include:

  1. Faulty water level pressure switch
  2. Poor water drainage
  3. Washing machine that is overloaded
  4. Blockages in the drain pump or drain hose
  5. Wiring or electrical issues with the water level pressure switch

How Can I Fix an ‘F8’ Error?

  1. Check the water level pressure switch by unplugging the washing machine and checking that it is responding to the water pressure changes.
  2. Make sure the washer is not overloaded.
  3. Check the drain pump and drain hose for any blockages and remove them.
  4. Check that all connections to the water level pressure switch are still in place and undamaged.
  5. Call a professional if the error persists after checking for all the above issues.

Are There any Tips for Preventing an ‘F8’ Error?

Yes, there are some tips for avoiding the ‘F8’ error code on a Whirlpool washer:

  1. Make sure the washer is not overloaded.
  2. Check the water level pressure switch regularly and replace it if necessary.
  3. Ensure the drain pump and drain hoses are free from debris and blockages.
  4. Regularly check all connections to the water level pressure switch.
  5. Consult a professional if you are unsure of any of the above steps.

Key Takeaways for Solving the “F8” Error Code on Your Whirlpool Washer

  1. An ‘F8’ error code on your Whirlpool washer usually has an easy-to-find solution.
  2. An ‘F8’ error code indicates a system suspension, meaning the washer may not be able to finish its cycle and needs troubleshooting.
  3. Unplug your washer for about 20 minutes to reset the system and try to restart the washer.
  4. Adjust the settings and water temperature in the cycle, and ensure connections are secure.
  5. If all attempts to rectify the ‘F8’ error code fail, contact a licensed technician for assistance.