Solving the Miele Dishwasher E70 Error Code

Are you experiencing your Miele dishwasher displaying the E70 error code? Don’t worry - the issue can likely be resolved without the need to call in a professional. In this blog post, find out what this error code means and how to diagnose and fix it.

With electronic products, errors can be a huge inconvenience and often require experience in order to tackle. One such error that you may come across with a Miele dishwasher is the E70 code.

This code may appear for any of the following reasons:

  • The inlet hose filter is blocked
  • The sink valve is closed
  • The waste water pump is defective

Here is a step by step guide to help you tackle the E70 error code.

  1. Begin by checking the inlet hose filter from the water mains. To do this locate the filter at the end of the inlet hose and clean it if necessary.

  2. If the filter is not blocked, you will then need to check and make sure the sink valve is open. This should be a visibly open element that facilitates the water to flow into the machine. If this is closed, open it and check that your machine is still displaying the E70 error code.

  3. Lastly, if the above two steps did not resolve the issue - you may need to contact a professional such as one of the licensed technicians from our Directory of Appliance Repair Technicians - as the problem could be with the actual washing machine such as the waste water pump being defective.

Although it may feel daunting, with the right knowledge and guidance, you can often find a solution and fix the E70 error code yourself. We hope this blog post has been of help to you! If you require any more assistance or need help with a different error code, please feel free to look through our Directory of Appliance Repair Technicians.

Solving Miele Dishwasher E70 Error Code

What is the Miele E70 error code?

The Miele E70 error code is a fault code that indicates a problem with either the heating system or the water intake system in a Miele dishwasher.

How do I know if my dishwasher has the Miele E70 error code?

The Miele E70 error code will display on the control panel of the dishwasher.

What causes the Miele E70 error code?

The Miele E70 error code is usually caused by either a faulty water inlet valve or a faulty heating element.

How do I troubleshoot the Miele E70 error code?

To troubleshoot the Miele E70 error code you should begin by checking the inlet valve for proper operation. If the inlet valve is working correctly then you can move on to checking the heating element.

How do I replace a Miele E70 error code element?

To replace a Miele E70 error code element you will need to disconnect the dishwasher from the power source, remove the bottom panel of the dishwasher and locate the faulty element. After the element has been removed, you can then replace it with a compatible new element.

Key Takeaways - Solving Miele Dishwasher E70 Error Code

  1. Miele dishwasher E70 error code can be caused by blocked inlet hose filter, sink valve not open or a defective waste water pump.
  2. Check the inlet hose filter from the water mains by locating the filter at the end of the inlet hose and clean if necessary.
  3. Make sure the sink valve is open - this should be visually open to facilitate water flow.
  4. If the steps above don’t resolve the issue, consider contacting a professional appliance repair technician.
  5. With the right knowledge and guidance, you can find a solution and fix the E70 error code yourself.