Understanding and Resolving the f28 Error Code on Your Whirlpool Washer
Is your Whirlpool washer displaying an “f28” error code? This is a common code that can be resolved without the help of a professional. Animportant thing to remember is that the “f28” error code signifies that your washer has reached a certain level of water temperature but is not able to reach an even higher one. Read on to learn more about this code and how to fix it.
This error indicates difficulty in the mechanical attempt to increase the water temperature. To resolve this, the first thing to do is unplug the washer and wait at least five minutes before plugging it back in. This allows the system to reset and may resolve the issue. If the error persists, there may be a short or blockage in the electrical connections that need attention.
If resetting the machine did not work, the next step is to check the thermal fuse. This is a small white device that helps protect the washer by acting as a failsafe when the temperature reaches a certain level. Inspect the fuse and see if it has been damaged or blown. If it has seen any physical damage, it will need to be replaced. If it was not damaged, it will need to be tested for accuracy.
The last step is to inspect the thermal protector device, which is connected to the heating element of the washer. This device will also need to be tested for over-heating and replaced if needed, as it is possible that this was the culprit.
The “f28″ error code can be resolved in most cases without calling in a professional, but there are times when a trained technician is required. If you feel that you need assistance, be sure to hire a reputable service professional that is familiar with Whirlpool washers. Our Directory of Appliance Repair Technicians can help you find a reliable technician in your area.
An “f28” error code usually means that something needs to be fixed in order to restore the perfect functioning of your washer. Resetting the machine, testing the thermal fuse, and inspecting the thermal protector are all simple steps you can take, but sometimes they are not enough. In these cases, hiring a reliable professional is the best way to ensure the proper functioning of your Whirlpool washer.
Troubleshooting the f28 Error Code on a Whirlpool Washer
-
What does the f28 code mean? The f28 code indicates a problem with the Central Control Unit (CCU) on your Whirlpool Washer.
-
How can I tell if the f28 code applies to my Whirlpool Washer? The f28 code will usually appear in the display window of Whirlpool front-load washers. If you see the code you will need to resolve the issue.
-
What are some common causes of the f28 code? The common causes of the f28 error code include communication errors between the washer’s CCU, the user interface control, and the drive motor, as well as issues with the wireless LAN card.
-
How can I reset the error code? To reset the f28 code you can open the washer’s lid and leave it open for around 30 seconds. This will reset the error code, but it’s important to ensure the cause of the code is repaired, otherwise the code will reappear.
-
What should I do if the error code persists? If the error code persists, then it’s likely the issue is with the CCU or the wiring harness, both of which need to be checked and replaced as necessary. It’s not advised to attempt to repair these items yourself, so seek professional help if needed.
Summary of “Resolving the f28 Error Code on Your Whirlpool Washer”
- The “f28” error code on a Whirlpool washer indicates difficulty in the process of increasing water temperature.
- Unplug the washer and wait 5 minutes before plugging back in to reset system.
- Inspect the thermal fuse for physical damage and test for accuracy.
- Also check the thermal protector device connected to the heating element for over-heating and replace if needed.
- If resetting the system and inspecting the parts does not work, hire a service professional for further assistance.