Guide to Fix 5e Error Code on a Samsung Washer

Are you having trouble solving the 5e error code on your Samsung washer? We’re here to help! Read on for step-by-step instructions on how to resolve this problem easily and quickly.

The 5e error code denotes a drain-related problem. This could mean a clog, kink, or foreign object trapped in the drain hose or a unit that is not sealing properly.

To fix this error, first unplug your Samsung washer and check for any kinks or obstructions in the drain hose. If there are any, straighten them out. Then, check the drain pump filter for any debris or foreign objects and remove them. If the drain pump is defective, it may need to be replaced.

Next, make sure the drain hose is properly connected and that the unit is level. The washer should not be tilted or raised off the ground by more than 1/2 inch. To do this, use a level or a carpenter’s level.

Also check to see if the drain hose is installed correctly. Make sure it isn’t kinked, crushed or clogged. It should be placed 4 to 6 inches above the floor and it should not be higher than the maximum marked on the hose.

Finally, check the washer’s wiring and connections. Make sure they are all properly connected and not damaged.

By following these steps, you should be able to successfully resolve the 5e error code issue on your Samsung washer. To avoid such issues, regularly inspect and clean the drain hose, and make sure all connections are secure and undamaged.

For more in-depth information about appliance errors and troubleshooting, check out our Comprehensive Appliance Error Codes Glossary. With this resource, you can easily access information about nearly all appliance error codes, including the 5e error code for Samsung washers.

FAQs on Resolving the 5e Error Code on a Samsung Washer

  1. What does the 5e Error Code indicate? The 5e Error Code indicates an issue with the water supply to your Samsung washer. This could be caused by either a low or a clogged water pressure.

  2. What will happen if I continue to use the washer with the 5e Error Code? Continuing to use the washer with the 5e Error Code can cause additional damage to the washer. Therefore, it is important to address this issue as soon as possible.

  3. How do I check the water pressure? To check the water pressure, you will need to use a water pressure gauge which is available at most hardware stores. Once you have the gauge, turn the water supply off and attach it to a faucet. Turn on the water and monitor the pressure. If the pressure is too low, then you will need to adjust the valve to increase it.

  4. What will happen if there is a clog in the water pressure? If the water pressure gauge indicates a clog in the water pressure, then you will need to open the valve to clear it. If that does not work, then you may need to call a plumber to have it professionally serviced.

  5. How do I reset the 5e error code? Once the water supply issue has been resolved, you can reset the 5e error code by pressing and holding the Power button on your washer for approximately three seconds. This should reset the error code and the washer should be back in working order.