Troubleshooting GE Washer Error Code FC 1
Did your GE Washer start flashing an FC 1 error code? You’re not alone. Many GE Washers will display an FC 1 error code when the machine stops spinning or won’t spin. Audio loud humming or other strange noises may also be heard coming from the washer when the code is displayed. In this guide, we’ll explain why your washer is displaying this code and the best way to fix the problem.
The FC 1 error code could be caused by a number of problems. It could be due to a faulty lid switch, a jammed pump, a bad timer, a faulty wiring connection, an incorrect water level setting, or a clogged drain hose. To determine the cause of the code, you’ll need to open up the washer to inspect it for any of these problems (or others). You should also make sure that the wiring is all connected properly and that the water drain hose is not clogged.
Once you’ve identified the cause of the FC 1 error code, you’ll need to determine the best way to fix the problem. If the cause is a faulty lid switch, you’ll need to replace it. If the cause is a jammed pump, you should unplug the washer and examine it for any blockages that may be preventing the impeller from spinning. If the cause of the problem is a bad timer, you’ll need to have it replaced.
In some cases, the FC 1 error code can be caused by a clogged drain hose. To clean the hose, you should disconnect it from the washer and inspect it for any blockages or debris. Use a damp cloth to remove any build-up from the hose before reconnecting it.
Error code FC 1 can be a pesky problem. However, if you take the time to inspect the washer and diagnose the issue, you should be able to fix it yourself. If you find that the problem is too complex for you to handle on your own, you may want to consider hiring a professional appliance repair technician. Our Directory of Appliance Repair Technicians can help you find a specialist in your area that can repair your GE Washer.
GE Washer Error Code FC 1 Troubleshooting
- What does “Error Code FC 1” mean on a GE Washer?
Error Code FC 1 indicates that there is a communication fault between the main control board and the motor control board on your GE Washer.
- What can I do to resolve the Error Code FC 1 issue?
Troubleshooting Error Code FC 1 typically includes checking the communication wires between the two boards and resetting the washer.
- How do I reset my GE Washer?
To reset your GE Washer, unplug the washer for 1 minute then plug it back in.
- Who should I contact if I am still experiencing the problem?
If you are still experiencing the problem after troubleshooting and resetting the washer, contact GE Appliance Service at 1-800-GECares (1-800-432-2737) for service.
- Is there any way to prevent Error Code FC 1 from occurring?
It is possible that Error Code FC 1 can be caused by power surges or other electrical issues. To help prevent the issue, ensure your washer is plugged into a surge protector.
Key Takeaways from “Error Code FC 1 Troubleshooting: Fix GE Washer Issue”:
- The FC 1 error code can be caused by multiple issues, such as a faulty lid switch or jammed pump.
- To fix the issue, it’s necessary to inspect the washer and diagnose the problem.
- If the cause is a faulty lid switch, then it needs to be replaced.
- Inspect the water drain hose for blockages or debris and clean it if necessary.
- If the issue is too complex for you to handle on your own, enlist the assistance of a professional appliance repair technician.