Troubleshooting the E62 Error Code on a GE Dryer
When a GE Dryer stops working correctly and displays an E62 error code, the cause could range from a simple to a more complex issue. Knowing the troubleshooting steps for this code can help get your dryer back in working order.
To help resolve the E62 error code in a GE Dryer, start by unplugging the device and plugging it back in again. This will cause the machine to automatically reset its settings and give you another chance to start a new cycle.
If it continues to display the error code, the issue could be with the moisture sensor. To test the moisture sensor, start by opening up the dryer. Locate the moisture sensor and remove it. Attach a multimeter to the two terminals of the sensor. You should see a slightly increased reading that will become higher the longer it is left attached. If the multimeter does not detect anything, the moisture sensor needs to be replaced.
Alternatively, the problem could be related to the motor overheating. To inspect this, unplug the dryer and remove the back panel to access the motor. Make sure there is no debris build-up that could be blocking the air flow and causing the motor to overheat. Cleaning the motor can often resolve the issue.
When the source of the E62 Error Code is not immediately clear, it is important to consult the dryer’s User Manual, which typically outlines the steps to troubleshoot the code. A user can also reference our Comprehensive Appliance Error Codes Glossary to find a full list of error codes, along with their explanations and solutions.
The E62 error code can be rectified if users take timely action and tinker with the moisture sensor or the motor. If the issue persists or cannot be diagnosed, then the best option is to consult a repair expert.
Troubleshooting e62 Error Code in GE Dryer
- What does the e62 error code on my GE Dryer mean?
The e62 error code on a GE Dryer indicates that there is a heating issue. The drum will not heat up as it should, so the cycle will not complete.
- What should I do to fix the e62 error code on my GE Dryer?
The first thing to do is to unplug the dryer for at least one hour. This will reset the electronics. If the error code persists after resetting, then you should check the heating coils for any damage or obstruction. If the heating coils appear to be in good condition, you should check the components of the thermal fuse and high limit thermostat.
- How do I check the heating coils of my GE Dryer?
To check the heating coils, you must first remove the back panel of the dryer. You will then be able to see the heating coils. Inspect the heating coils for any burns, or cuts. If any are present, it will need to be replaced in order to resolve the e62 error code.
- How do I check the components of the thermal fuse and high limit thermostat for my GE Dryer?
To check the components of the thermal fuse and high limit thermostat, remove the back panel of the dryer. Locate the thermal fuse and the high limit thermostat. With a multimeter, you will be able to test the components to make sure they are in working properly. If they are not, they will need to be replaced in order to resolve the e62 error code.
- Is professional help necessary to resolve the e62 code on my GE Dryer?
If resetting the dryer, checking the heating coils, and testing the components of the thermal fuse and high limit are unsuccessful, then professional help will be necessary to resolve the e62 error code. A qualified repair technician will be able to accurately diagnose and repair the issue.
Key Takeaways
- An E62 error code on a GE Dryer could be caused by a simple or complex issue.
- First try unplugging the dryer and then plugging it back again to reset the settings.
- To test the moisture sensor, attach a multimeter to the two terminals to read the current.
- Clean the motor of any debris build-up to prevent overheating.
- Consult the dryer’s user manual or an error codes glossary if the issue cannot be diagnosed.